Graco Industrial Diaphragm
Husky
Air-Operated Double Diaphragm Pump This 1-inch diaphragm pump is equipped with an effective and reliable air valve system. Available in aluminum, stainless steel, acetal, polypropylene and PVDF. |
|
Graco 1040 Diaphragm Pump Performance Chart
|
|
|
- Chemicals
- Contaminated surface water
- Adhesives, varnishes, dispersions, solvents and stains
- Resins, latexes, wood preservative stains, concrete paints and primers
- Inks
- Drum fluid transfer
- Unloading fluids
- Chemical evacuation
- Ceramic glaze supply
- Dewatering and sump evacuation
Air Controls
246947 |
Regulator / Filter Assembly 1/2” npt(f) (12.7 mm) |
110199 |
Quick Connect Air Coupler 1/2” npt (12.7 mm) |
110196 |
Quick Connect Air Nipple 1/2” npt (12.7 mm) mbe |
110225 |
Air Shut Off Valve 1/2” npt (12.7mm), bleed type, relieves trapped air downline of valve |
224040 |
Air Runaway Valve (stop pump from cavitating when empty) |
112812 |
Air Muffler (comes with pump) 1040 pumps |
Center Section Conversion Kit
Converts an aluminum center section to SST, includes air covers.
246450 |
Husky 1040 |
55-Gallon Siphon Kit
222916 |
8 ft (2.44 m) polyethylene hose and couplings |
Remote Pump Controllers
195264 |
CycleFlo (cpm rate and batch control) 120v |
196706 |
CycleFlo (cpm rate and batch control) 240v |
195265 |
CycleFlo II (rate controller with solenoid valve) 120v |
Dual Inlet Manifold
685984 |
Aluminum Husky 1040 only |
Surge Suppressors
See 308703 for additional information.
Automatic Husky 2000, 2 in (50.8 mm)
239092 |
Polypropylene (wetted bottom and top housings) with a Buna N bladder |
239128 |
with PTFE bellows |
239093 |
Stainless Steel (wetted bottom and top housings) with a Buna N bladder |
239126 |
with PTFE bellows |
239127 |
with a Fluoroelastomer bladder |
Adjustable Husky 2000, 2 in (50.8 mm)
239087 |
Polypropylene (wetted bottom and top housings) with a Buna N bladder |
239136 |
with PTFE bellows |
239088 |
Stainless Steel (wetted bottom and top housings) with a Buna N bladder |
239134 |
with PTFE bellows |
239135 |
with a Fluoroelastomer bladder |
UL Pumps
For use with leaded and unleaded fuels
236265 |
Husky 1040 for use with leaded fuel (seat, ball, diaphragm) |
236267 |
Same as 236265, maximum inlet of 50 psi (3.4 bar, 0.3 MPa) |
Leak Detectors
239080 |
Polypropylene Housings with PVC Wetted Parts |
110146 |
Shut Off Valve Kit (used in conjunction with 239080) |
Miscellaneous
239005 |
Polypropylene 1 in (24.14 mm) flange for Husky 1040 D72XXX pumps |
239008 |
Stainless Steel 1 in (24.14 mm) flange for Husky 1040 D71XXX and D74XXX pumps 1” ANSI x 1” npt(f) |
239009 |
PVDF 1 in (24.14 mm) flange for Husky 1040 D75XXX pump |